Side Banner
Swinghandle RS 105 for PHZ, RC II
หมวดหมู่สินค้า: Highlights
รหัส : 2-102
25 เมษายน 2561
ผู้ชม 1227 ผู้ชม
Advantages
- For sheet-metal and plastic enclosures with liftable operating lever, 90° rotation.
- For profile cylinders and round rods.
- Lockable with profile cylinder 45° or 90° cam position.
- For profile cylinders 40 and 45mm.
- RH or LH application.
- Complies with security test DIN EN 1630 RCII.
- Secured with a bolt against vandalism.
- Saw up difficult because of steel insert (HRC 45).
- IP65 according to DIN EN 60529.
- To get the same design for RH and LH doors it is possible to make two cutouts with □46 symmetrically to the middle of the door.
- For Swinghandles with mechatronic locking control see www.elinebydirak.de.
Materials
- Swinghandle, fastener, dish, dust cover and cap: zinc die, black
- Other surfaces on request!
- Bolt: stainless steel AISI 316
- Shaft:brass
- Washer, nut and screw: steel, zinc plated
- Flat external seal: NBR/ Fiber
Remarks
1. If a profile cylinder 40mm is used, the cylinder is located 5mm lower in the operating lever.
s = max. 3mm
